ReDream PSU


12v power supply for all
Sega Dreamcast consoles



This is Rexus’s take on the DreamPSU. This 12v power supply works with all versions (PAL, NTSC-US, NTSC-J).

You just need a 12v AC/DC adapter with 5.5×2.1mm barrel size positive center tip and you’re good to go!
I recommend this one – LINK

This is compatible with all ODEs!!! ODE = optical disc emulator.
No soldering required to install this kit!

Some recommend power supplies will be listed in the FAQ/Troubleshooting guides once they are ready.

The PSU includes a couple of extra sockets (5v and 12v) for extra mods (connectors are JST VH).

Ripple+noise on the 3.3v rail is 28mV and on the 5V rail is 19mV under max load (measured with a 20Mhz BW limit).

Additional information

Weight .5 lbs
Dimensions 7 × 7 × 2 in
Fully Assembled?

Yes, No

You may also like…